1841-A Wadsworth Blvd
Lakewood, CO 80214
phone (303) 232-6861
toll free voice (800) 216-2941
fax (303) 232-3472
toll free fax (800) 863-3472
Flojet is a leading global supplier of products in the Motion and Flow Control division of ITT Industries
Flojets are a self-priming pump. It may be located several feet from the tank, above or below the liquid level (lt is not a submersible pump.) For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak. Pump head may be rotated in 90° increments to simplify plumbing
4000 Series
Call (800) 216-2941 for more information
These are just a few of the configurations and styles available.
Solenoid Pump
Air Operated Diaphragm Pump
5700 Series
Air Operated Diaphragm Pump
5100 Series
2100 Series/Duplex II
FLOJET 2100 delivers up to 50 PSI (3.5) bar working pressure. See model 2135 or 2130 for applications up to 70 & 100 PSI (4.8 & 6.9 bar) respectively.
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve is opened and closed.
Can run dry without damage and handle liquids up to 130° F (54° C).
Duplex Diaphram Design eliminates troublesome shaft seal.
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquide level.
Powerful, permanent magnet motor with low current draw and long life brushes.
U.L. recongnized (115 Volt AC only)
Availible in 12 to 230 Volts.
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
Compact design and plug-in port fitting make installation easy.
Can run dry without damage and handle liquids up to 130° F (54° C).
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquid level.
Powerful, permanent magnet motor with low current draw and long life brushes.
From 0 to 2 gpm
Compact design with plug-in hose connections for quick installation.
Variety of elastomers to ensure chemical compatibility.
Variable capacity from zero to the maximum flow.
No pressure relief or bypass pluming required.
Excellent self-priming. Pump may be located above the liquid level.
Highest flow rate for any air pump of comparable size.
Stall proof design with patented shuttle valve.
Easy installation with all quick disconnect ports.
Quiet operation with large exhaust muffler.
Sanitary design with inset molded diaphram.
Leak resistant radial seals, no critical O-Ring seals
Robust design with durable integral mounting.
High Pressure Oscillating Pump
Inclides Internal Diode
Runs dry for short periods
For Low to Medium Pressure Spot Spraying
For Consumer Carper Extraction Machines
Service Life:>1000 hrs. Continued or Intermittent Duty
U.L. abd CSA Recognized, CE Certified